The table below is in Chicago
The fireplace below started out a little bland and with a little metal work, nice.
Starfire and red topping.
The fireplace below is a very unique fireplace in Huntington Beach. Black , black reflective, red topper and red topping.
Click on any of the pictures below to how this was actually made.
Click on any of the pictures above to how this was actually made.
The fire pit below has clear, starfire, amber topping, amber topper and dark red orange topper.
The fireplace below has an aluminum surround and starfire in Palm Springs.
The pictures below are from the Lure Lounge at the Wynn in Las Vegas. This was done for Steve Wynn with all gold. This was taked without the flame on and when we return we will have pictures of the fire pit lite up
The fire pit below has clear with our very own ICE!
Thr feirplace below was hand made by one very creative customer, great job! It has a starfire base and clear pyrite added to the surface for a litle sparkle.
The pictures below we will be showing how to do a 3" install (all glass), a surround painted black and a triple burner with ice and starfire.
Above and below are a typical of what most fireplaces look like (yuk)1
Above and below with a triple burner, some cleaning and a little bit of paint.
Above and below we installed an aluminum surround painted black. Only starfire is installed for now.
It's hard to see but we did install Ice on top of the starfire. If you noticed we had to pile a small mound in the front to cover the massive pipe connection. Did you even notice it in the first few pictures?
With the surround it make the room. We are proud of our inventions and ideas because our customers are always pleased.
The pictures below are of a 2" install with starfire and black paint and this install took only 30 minutes.
Be sure to clean the fireplace before painting.
install the burner and test the flame pattern.
test the flame on high and low to insure the flame goes straight up and does not hit the walls.
after masking and painting we turned the flame on low to heat the paint to dry it quicker.
Turn the light down low to see the flame pattern as you will have the light donw low with your evening fire. The pipe burners can be adjusted to the desired effect.
Above the lava rock goes in and then we test the flame pattern once again.
Above the sand goes over the lava rock and we once again test the flame pattern.
Pour the glass on and your done.
We have been told by dozens of customers that you will need an installation by a tech. As you can see how easy this actually is, they just want your money more than you do. Again this was a 30 minute install.
The 2 pictures below have bronze, bronze reflective, black, black reflective and pale cobalt blue topper.
The fire pit above and below have gray, gray reflective, Ice and red topper.
The fire pit below had clear and one really cool flame effect!
This is in Etiwanda California
This fireplace contained 1 piece of each color of topper.
This is a new home with logs and a screen, average at best. Has anyone ever come over to your house and said" Nice Logs"? No and we are going to show you how to create a masterpiece!
The pictures below are of a typical direct vent burner.
This is a picture of the automatic starter and thermo coupler
After you have closed off the bottom of the fireplace and attached the adapter, your ready for glass!
Here we are testing the burn pattern of the double burners. Our burners have 2 rows of holes in each pipe to give you 4 rows of flames.
After pouring the glass make sure the automatic starter is just above the glass so it can work properly. You can hide it with glass all around the element and it helps if it is in a hole.
Here we installed an aluminum surround that has been painted black.
We have several more pictures of this fireplace with Ice and a few colors of toppers installed and we will have these pictures up in a few days.
We will also be posting several direct vent fireplaces to show you how easy it really is.
Here is a fireplace before and after with clear
The fireplace below has clear installed and had a double burner which was converted to a triple for more flame effect.
The stainless steel tray below has azurlite in the tray. A very clean and simple look.
The fireplace below has a larger surround and starfire installed. Please note the this surround is the metal shell only without the inner frosted glass.
The fireplace below has black and black reflective installed
The fire pit below has Ford Blue, Ford Blue Reflective, V Blue, V Blue Reflective, Turquoise Toppings, Deep Royal Toppings and Copper Blue Topper on a bed of 1/4" and 1/2" starfire
The fireplace below has clear installed
The fireplace below has a starfire base with red toppings, red toppers, scarlet red toppers and Ice
The pictures below are of a starfire base with black reflective on top.
The fireplace below has f blue and f blue reflective installed
The fireplace below has 1/2" chunky clear with a little bit of ice topping it off installed and a simple self install. This is a remote control and it is located on the bottom right.
The fireplace below is a direct vent installation with gray, gray reflective and clear pyrite installed
Has anyone ever said "Nice Logs"? I don't think so. We are going to show you how to transform your direct vent fireplace into a real attractive fireplace.
The key is not to change teh amount of gas going into the fireplace, so don't change teh regulator.
The thermo coupler (heat detector) will be raised to the surface to insure it will still work.
Drop in a new burner or use the one that was installed with your fireplace and your done.
THESE WILL BE OUR NEWEST FIRE PITS WITH GRANITE TOPS AND OF COURSE GLASSEL IN THE FIRE PIT AND YOUR CHOICE OF COLOR. THESE WILL BE NATURAL GAS OR PROPANE BOTTLE FUELED. WE WILL POST MORE DETAILS IN A FEW DAYS.
The 4 pictures below are all clear glass
This is in Yorba Linda California with a stainless steel surround and clear glass.
The 3 pictures below have bronze, bronze reflective, gray and gray reflactive with the outside of the fireplace painted medium brown with fireplace paint.
The 2 fireplaces below are the same fireplace! This fireplace started out with a brick face and clear glass
After a little black granite and some clear ice, we have a very nice fireplace!
This fireplace belongs to Carl Herkes
The fireplace below has a clear base with bronze on top
The fireplace below has evergreen, evergreen reflective and topped with Ice.
Before and after, big difference?
The fire pit/ fire table has blue and blue reflective in the center.
This is a 4 piece glass surrounding a fie pit.
The 6 fireplace pictures below have starfire, amber and a surround. This is in Texas and is a customer install. Very nice Rodney.
The 6 pictures are of green, green reflective, a 2" install with lava rock filler and is a self install
The fireplace below has red and a clear base
The fireplace below has starfire, ice and copper ruby red.
The fire pit below has a clear base with 1/4" starfire and 1/2" starfire, Yellow Amber Topper. Cobalt Blue Topper and Emerald Green Topper and a little bit of ICE. The earth as the back yard and a lot of friends, wow!
The tables below were made for the Marriott in Boise Idaho
Marriott Hotel Boise Idaho
This is a proto type fire table that when finished will be wrapped in wire and finished in smooth high heat concrete mix with a 48" fire bowl in the middle. There will be a 6" brushed metal finished edge to cover under table lights. The table is 60" wide and 24" tall. These will be delivered to Boise Idaho, Marriott Corp. We will post finished pictures as soon as we can.
A brushed finish 8" edge was added along with a touch sensor to turn the lights on under the table. It is a 3 position sensor (high, medium and low).
Now the high heat concrete is applied and shaped.
As it turns out there is a 36" triple ring under the lava rock and we are down sizing it to a 24" double ring. As you can see when the wind blows the fire get a little bit close to the edge.
If you had a drink near the edge it would be a little bit warmer now. The sides will be dropped about 3 inches and the center raised about 3" and a 24" ring will finish it off. We will post the pictures of the glass and ICE when it is installed in a few days.
Here are the finished table pictures
We use clear base with lots of our ICE ICE ICE!
