More Fireplace and Fire Pit Pictures..

The fireplace below is in Beverly Hills California.
We use a black base glass with Clear Ice Ice Ice on top. The customer wanted to use their original burner to keep the flames localized in the center area. This fireplace goes from "Log Ugly" to very nice and contemporary in about an hour. If you really take a look at your fireplace place in the beginning it almost looks like an incinerator for long ago.
bh 1
Not very nice? Nice Logs? I don't think so!
bh 3
bh 5
bh 4
Now it's painted and ready for the glass.
bh 8
bh 9
A black base glass and 5 lbs of our Ice Ice Ice.
bh 10
bh 11
bh 12
bh 13
You can't see the Ice on still pictures but what it is doing like looking into a spoon, it reflects backwards and appears to be melting. Ask for a sample and you will be amazed.
bh 14
The fire pit and fireplace below are located at the hotel Casa 425 in Claremont California, downtown Claremont. www.Casa425.com . The fireplace had a splash of clear base glass over a ribbon burner with a remote control for a simple but elegant look.
The fireplace is just inside the front doors as you enter to greet you.
casa 1
casa 2
casa 3
casa 4
casa 5
The fire pit below is also at the hotel Casa 425, www.Casa425.com and is in the court yard at the hotel. There are 2 of the fire pits and they are 60" x 60" x 20" tall and they are powder coated black with a clear base glass installed over an 18 round stainless steel ring.
casa pit 1
casa pit 2
It's like Where's Waldo, can you spot the 2 fire pits below?
casa pit 3
casa pit 4
casa pit 5
casa pit 6
casa pit 7
casa pit 8

he electronic ignitions that were used in the Renaissance Hotel in Glendale, Arizona were our MVKEI HC-5 units for natural gas. We used flame rod sensors on these torches.

tiki 1

tiki 2

13 of these were installed around the hotel

tiki 3

We use 12" stainless steel rings on the torches.

tiki 4

tiki 5

tiki 6

 

The 5 RV fire pits below are just after fabrication. They are 24" x 24" with a single 18" stainless steel rings installed.
rv 1
rv 3
rv 4
rv 5
These can be made in any size or shape.
The RV fire pit below is a standard 18 x 18 with a 12" stainless steel ring.
rv 6
rv 7
rv 8
The RV fire pit below was and is used by Rrivre Works in Los Angeles www.RrivreWorks.com . They are on of the premier event planners in Southern California. Check out their web site.
They used our standard 14" x 14" RV fire pits and built tables around them with a frosted glass table top for the Linda Young Event in Newport Beach California. These can be made for natural gas or propane. The ones used were propane. We will be working with Rrivre on several up coming event and we will be posting a few over the top new products. We are going to be building water and fire features fro some of the events. Be sure to check out his web site!
rv 2
rv 1

 

The fire pit below is a custom propane fire pit. We use perforated aluminum for the wall construction and the pit is single wall construction with a 1 1/2" deep pan on top. We installed a 12" double stainless steel ring for the burner. The rest was done by Bill Moss in Texas. Very nice job Bill!. We built the pit to Bills specs which were 26" x 26" x 20" tall so he could finish it to the size he wanted. The pit shown is one of our proto types and not the actual pit used.

propane fire pit 1

Above is how it started

And below is what the customer made it!

bill 1

bill 2

bill 3

bill 4

bill 5

bill 6

bill 7

bill 8

Above and below is the quick disconnect for the propane gas

bill 9

bill 10

We use black base glass in the fire pit. It looks light because of the flash from the camera.

bill 11

The pictures below are for the opening "90210" Malibu party on the night of the series premier. Click on the link to see the full story and write up from BizBash .

http://www.bizbash.com/losangeles/content/editorial/e12364.php

We use Starfire in our propane RV Fire pits on the Malibu Beach Party.

90210 a

The tables were furnished by    www.RriveWorks.com and we furnished the RV Fire Pits.

90210 b

The next fire pit was designed by and built for Kevin Leys of Chicago. He did a great job and you decide.

First he started with a single wall construction fire box with a pan on the top

k1

k2

Then it was framed for exterior plywood or you could use metal studs and wonder board.

k3

The gas valve was located to the outer framed wall

k4

k9

k5

k6

k7

This is a natural gas fire pit. It was tested as soon as it turned dark, fun!

k8

k10

k11

k12

Now we add the crushed lave rock and glass over that. There are many sub materials you can use as a filler. Just ask.

k13

k14

Great back yard by the way! Chicago, remember?

k19

k20

Now we start to apply the tile for the finishing touch.

k15

k16

k17

k18

k21

k22

k23

k24

The fire pit below is in Glendale, Arizona at the Renaissance Hotel. We installed an electronic ignition with a 30" stainless steel ring. The glass use was a Clear base with Starfire on top and Topped with 42 lbs of Apricot Topper. These pictures were taken with the edges still exposed which were covered by a layer of Starfire.

katz 1

katz 2

 

The fireplace below is in Dallas Texas and was installed by Nadine (one of our dealers) she installed Gold with a stainless steel back
gold 1
gold 2
She forgot to take a few pictures with the fire on, oops.
gold 3

The two boxes below are our IPI battery operated electronic ignitions which are 100,000 btu rated. The exterior boxes are for protection from the weather and keep the unit and batteries safe and dry. These are typically installed under the glass in a fire pit our doors under the glass or in a sub panel just like our 110 volt electronic 415,000 btu units.

dual 1

dual 3

On the left you can see the gas lines, one in and one out along with a 60" IPI lead (Intermittent Pilot Ignition). This allows the ignition system to be 60" away from the flames if required.

dual 4

 

 

The next several pictures are of a 24" x 54" x 3 1/2" deep triangle pan with our first Ribbon Burner! It lays in a bed of black silicone carbide "Black Magic"

ribbon 7

ribbon 6

ribbon 5

The flames measured 24" tall below! Because of the design we implied to this new burner they seem to be coming from nowhere!

ribbon 4

We didn't fill the pan with sand just because. These ribbon burners will be available very soon and we will post dozens more pictures as we have time to post them for you to see. The will be available in steel or stainless steel. With or with out a pan. This burner was built for another customer in Palm Springs for their fireplace and we will post pictures of it as well.

ribbon 3

ribbon 2

This pan will be installed in a custom table built by the customer in Palm Springs.

ribbon 1

The fire pit below has a Ford Blue base with several pounds of Deep Royal Topping giving this pit a very royal look!

pit 2

pit 1

 

The stainless steel pan burner below has a 24" stainless steel star burner installed and it is connected to our 110 volt electronic ignition. This is a propane burner.
star 1
star 2
star 3
star 4
star 5
We then covered it with our Starfire to test for soot and as you can see, a clean burn.
star 6

 

 

The pan below is a stainless steel pan with a 3/4" lip on top and it sits on 4" round brushed front legs. We will post pictures of the finished pan with glass when we get them.
round legs 3
round legs 2
round legs 1

 

 

The fireplace below has a stainless steel pan installed with a ribbon burner. The front legs of the pan are 4" round brushed legs with our standard legs in the back. Here you can see the different flame patterns of our ribbon burner. We then installed a brushed aluminum surround.
The first 3 pictures are of the fireplace before we started on it. The wall was built out 8" for the flat screen above the fireplace.
reddish 1
reddish 2
reddish 3
The next 4 pictures are of our ribbon burner after fabrication.
reddish 4
reddish 5
reddish 6
reddish 7
Now we pour on Starfire to help conceal the burner.
reddish 8
reddish 9
reddish 10
Our ribbon burners can actually raise the flames quite a bit!
reddish 11
reddish 12
reddish 13
This is one of our smaller 18" ribbon burners.
reddish 14
The pan is now installed in the fireplace.
reddish 15
reddish 17
reddish 18
reddish 19
Add a little fire
reddish 20
reddish 21
reddish 22
reddish 23
reddish 24
reddish 25
reddish 26
Now we install the surround to finish this fireplace off!
reddish 27
reddish 28
reddish 29
reddish 30
reddish 31
reddish 32
reddish 33
reddish 34
reddish 35
What we do is very simple, we listen to the customers needs and build from their imagination.
reddish 36

 

 

The pan below is a stainless steel pan with a 415,000 btu electronic ignition installed under the pan. It's what the customer wanted. It's like hooking your car up the the shuttle for more power. This pan was installed in Nipomo/ Pismo Beach California, Shea Homes and we get up there we will take finished pictures as we installed 6 other fireplace which we will take pictures of as well.

415 1

The front stainless skirt hide the control box which is 4" tall.

415 2

415 3

415 4

415 5

415 6

 

 

24" 1/2 round triple stainless steel pipe 304 stainless steel pipe
The burner below is a propane manual valve with a pilot light. this burner is mounted on a 60" x 30" 1/2 round stainless steel plate which is not included as standard but an option.
The burner itself is a #304 stainless steel 1/2" pipe triple ring burner and can be used for propane or natural gas.
half round burner 4
half round burner 3
half round burner 2
half round burner 1

 

 

The fireplace below has a Starfire base with Citrine, Dark Red Orange, and Orange Topper with a touch of our Ice Ice Ice. This was a complete remodel in natural gas and a remote control was added with a pilot light

kim 1

kim 3

kim 5

kim 6

kim 7

kim 9

 

kim 1

kim 2

kim 3

 

 

The fire pit below was another failed attempt from a company called Fire By Design in Nevada. They helped these customers design a propane fire pit with an electronic ignition (fair at best) and with the lack of knowledge about propane here is the failed attempt. The ring was to placed above the glass according to the manufacture (wrong!). There was no air mixer/ venturi let alone calibrating for proper air mixture to insure a clean burn. The company would not even return any calls to the customer and we repaired the system and made it work properly. This home was on the beach in South Florida.
nasty 1
nasty 2
nasty 3
nasty 4
nasty 5
nasty 6
Several thing went wrong here, wrong filler (lava was too large), Bad cage design over the pilot light/ ignition, they buried the ignition system under the ring and glass, the ring was left on the surface, no air mixer, no customer support, the ring that was supplied was a steel ring for outdoors, wrong! This should of been a stainless steel ring and a strong recommendation for a cover because it was at the beach! We would of also given the option of a #304 stainless steel marine grade ring. We also manufacture our our rings as well.
nasty 7
nasty 8
nasty 9
The fireplace below is in Palm Desert California and was a self install with a crushed lava base, Clear over the lava, Starfire on top of the Clear and Topped with Amber Diamonds and a splash of our Gold . It looked great until they found the burner was too close to the back which burned the back wall. I don't know if this was repaired as we did send paint and instructions on how to prevent this in the future. The fireplace looked great except for the "skid mark" on the back wall.
joy 9
Above it still looked good here!
joy 8
joy 7
About our Diamonds, they are made of crystal and when you see them in the fireplace you actually see the fire reflection reflecting the flame backward as if the Diamonds were melting from the inside.
joy 6
joy 2
joy 1

The RV Fire Pit below is our first Stainless Steel RV Fire Pit

rv 1

rv 4

rv 3

rv 2

To see the RV Fire pits in the E Store Click Here!

To see the Stainless Steel RV Fire pits in the E Store Click Here!

 

The fire pit below has a Azurlite base glass with Aquamarine Blue Topper, Hyacinth Topper, Citrine Topper and Copper Ruby Red Topper. This is a propane fire pit in Texas. Our dealer installed this glass and explained to the customer to eliminate the soot from the propane we had to lean the mixture with air. The customer asked the burner manufacture to come out and inspect the fire pit. The manufacture told the customer the glass was defective and this was causing the soot. The manufacture didn't even know how to get a clean burn on their own product! Needless to say the fire pit is still producing clouds of soot and the customer now knows the manufacture didn't even have a clue. The smell in propane is an added oil to the liquid propane so it can be identified. The oil will still burn off as the fuel is used but we lean the fuel by introducing 6 parts of air to the fuel to virtually eliminate the soot from the fire. Below are before and after pictures of the propane fire pit.
pit 1
pit 2
As you can see below the fire pit was creating soot long before we even started. The glass had nothing to do with burner as the burner was in the middle of the glass. The manufactures of most of these propane fire pit and fireplace burners don't even have a clue on what they are doing so please be careful. In this case the manufacture didn't know how to get a clean burn so there fore he said it can't be done! You be the judge, what looks better?
pit 3
pit 4
pit 5
pit 6

 

The fireplace below is in Palm Springs California.
This is first for us because we have heard of this, but no one has ever sent us pictures! Well here they are! We installed Giant Logs on a base of Amber Topper with about 20 lbs of Light Amber Topper. Here it is and you be the judge.
palm springs 1
palm springs 2
Below we installed 2 triple 30" "H" burners.
palm springs 3
palm springs 4
The fireplace was about 3" deep and we were installing Amber glass so we used a sand base to build up to the logs but you would still be able to see inside of the grate where the flame would start.
palm springs 5
palm springs 6
Below we poured about 125 lbs of Amber over the sand and you wouldn't even know it was there.
palm springs 7
palm springs 8
palm springs 9
palm springs 10palm springs 10
and here is the finished fireplace. We are waiting for a few evening pictures from the decorator.
palm springs 11
The fire pit below is in Palm Springs and the customer poured about 350 lbs of lava and we topped it with 80 lbs of our 1/4" crushed lava to keep the glass from falling through the larger lava rock. We used a 50" stainless steel "H" burner and topped that with 120 lbs of Azurlite.
palm springs 12
palm springs 13
palm springs 14
They left about 3" to 4" of the interior glass tile showing, very nice effect.
palm springs 15
The fire pit below is in Canada. We used a Black base with Steel Blue Topper on top with Black Luster as well. A double stainless steel "H" burner and a marine grade fire pit cover.
canada 11
canada 5
canada 4
canada 2
canada 6
canada 7
canada 8
canada 9
canada 10

The fireplace below in in Lakeland, Florida and was installed by John Addison for his customer. The fireplace has one of our propane pan burners with a remote control. We built a brushed aluminum surround with out the inner glass per the customer request. The glass that was used was a Gray base glass with Black and Copper Ruby Red on top.

john 1

As you can see the fireplace was not much to look at until we added our touch.

john 2

john 3

john 4

john 5

You be the judge, We think it turned out wonderful!

john 6

 

 

The fireplace below is a before and after and a "how to" make it low and lean. A more contemporary look. This is a self install by Rich Kamins and one very nice job!. He used a Bronze and Bronze Reflective base glass. Topper with a bit of Starfire. Ice Ice Ice and about 2 pounds of Copper Ruby red topper for a splash of color.

Typical nasty fireplace before Moderustic!

rich 9

rich 1

A few bricks and some drywall

rich 2

rich 3

Some sand under the burner for filler to raise the base glass.

rich 4

rich 5

rich 6

rich 7

And here you have one nice finished fireplace.

rich 8

 

The fireplace below belongs to Ross Barnett in Florida. This was a ventless propane installation. Ross built a front wave design and we built a special wedge pan with the controls underneath. This is a remote control ventless burner. Great job Ross! The glass that was uses was:
Black and Black Reflective
Gray and Gray Reflective
Aquamarine Topper
Copper Blue Topper
Light Blue Tubes
Cobalt Blue Topper
Pale Cobalt Blue Topper
and here are the before and after pictures.
ross 12
ross 11
Above is before the wave
and below is the wave before out ventless burner was installed.
ross 10
ross 9
ross 5
ross 8
ross 7
ross 6
ross 3
ross 2
What makes us different from anyone else is that we allow you to exercise your imagination. If you see it, dream it, draw it, imagine it we can build it for you. Ross saw what we did for other customers and he came up with this very cool design for us to build for his family room, thanks Ross!
ross 1

The fireplace below a Starfire base with

Copper Blue Topper

Cobalt Blue Topper

Dark Red Orange Topper

Cherry Red Topper

Jade Green Topper

Lime Green Topper

Lime Green Topper

Black Topper

and Lilac Topper

What make us different from anyone else is what we offer you as a selection. We offer hundreds of colors, sizes, textures, variations, categories and more importantly we set the standard which everyone else can only try to imitate us. We welcome your comments and suggestions so please send us your comments. Imitation is the highest form of flattery, thank you.

chris 3

chris 2

chris 1

 

 

Below is one of the two Fire Sticks we built in Nopomo, California at the Shea Homes Trilogy project. Each fireplace had an electronic ignition located on the side of the fireplace in a cabinet inset into the side of the fireplace.

fire sticks 1

The fireplace below is a propane fireplace with a propane burner and remote control. We used a Clear base with Starfire on top. Then we added:

Medium Amber Topping,

Yellow Amber Topper,

Steel Blue Topper,

Dark Red Orange Topper over the base glass. The controls were covered after the install was finished. If you look closely you can see the pilot light assembly.

w 3

w 1

w 2

w 4

w 5
The fireplace below is a typical peninsula direct vent fireplace. A simple conversion. We used a Bronze base with Gold on top with Ice Ice Ice and Clear Diamonds and Pink Diamonds.
julie 1
julie 2
julie 3
The fireplace below has a 3/8" Starfire base with 1/4" Azurlite, Citrine Topper, Hyacinth Topper, Lagoon Topper, and 1/4" Platinum laminated to the back wall. This was installed in Dallas Texas by Nadine.
nadine 2
The fire pit below is again in Dallas Texas and installed by Nadine. She used a Black base with Gray base glass, Gold base glass, Bronze Rust Copper base glass and a splash of Azurlite.
nadine 3
 
The fire pit below is in the Palace of Qatar and this was commissioned for the King of Qatar. The fire pit is a propane/ butane fueled fire pit and it was installed by Gasco of Qatar. They didn't understand the glass so they opted to use lava rock. Now they (the King) have ordered the glass and if we can get the pictures we will post them.
qater 2
We did propane for the King and there are no issues! Awesome marble!
qater 3
qater 4
 

Additional Links for Pictures.

Fireplace Pictures

More Pictures

Self Installation Fireplace Pictures

Fire Pit Installation Pictures

Fireplace Paint

Interesting and Cool Fireplace Pictures

Customer Color Creations Fireplace Pictures

More Fireplace Pictures

Fireplace Surrounds Pictures

Even More Fireplace Pictures

Pans, Burners and Baskets Pictures

New Products Pictures

How Not To Do It Fireplace Pictures

HGTV Fireplace Pictures

Even More Fireplace Pictures

Unique Fireplace Pictures

Fire Balls for Fireplace Pictures

Direct Vent Installations for Fireplace Pictures

Before and After Fireplace Pictures

Still More Fireplace Pictures

Installation and Operation Fireplace Pictures

Remotes, Surrounds and Fireplace Pictures

Fireplace Burner Pricing and Pictures

Fireplace Pictures of designED

Ventless Burner Fireplace Pictures

Propane Burner Fireplace Pictures

Propane Burner Self Installation Fireplace Pictures

Black Magic Fireplace Pictures

HGTV Kenneth Brown Fireplace Pictures

Fireplace Paint Pictures

Self Installation Fireplace Pictures

Self Installation Made Easy Fireplace Pictures

What Is An Insert Fireplace Pictures

Electronic Ignitions and Fireplace Pictures

And More Fire Pits And Fireplace Pictures

Why We Are A Green Fuel Source Fireplace Pictures

DIY Network Fire Pit And Fireplace Pictures

Self Install Fireplace Pictures

More Fireplace And Fire Pit Pictures

Ribbon Burners For Fireplace Pictures

Fireplace, Glass And Logs? Pictures

Modernize Your Fireplace Pictures

Custom Fireplace Pictures

Cool Flames Fireplace Pictures

Still Even More Fireplace Pictures

Even More Fire Pit And Fireplace Pictures

Sterling Silver Fireplace Pictures

More Fire Tables, Fire Pits And Fireplace Pictures

Let's Build It Together Fireplace Pictures

More Fireplace And Fire Pit  Pictures

More Self Installation Fireplace Pictures

Don't Sweat It, HGTV Fireplace Pictures

Another Picture Page Fireplace Pictures

Fireplace Pictures Fire Pit Pictures

HGTV DIY Fireplace Pictures

links To Even More Fireplace And Fire Pit Pictures

 

Additional Links for Fire Pits and Fireplaces.

Fire Tables and Fire Pit Pictures

Fire Pit and Fire Table Pictures

Fire Pits Pictures

Fire Pits 2 Pictures

Custom Tables adn Project Pictures

Metal Page Pictures

Portable Fire Pits and Fire Tables Pictures

Still More Fire Pits and Fireplace Pictures

Fire and Water Feature Pictures

Fire Pits and Remote Controls Pictures

Portable Propane Fire Pits Pictures

And More Fireplace and Fire Pit Pictures

Portable RV Fire Pits Pictures

More Fireplace and Fire Pit Pictures

Fire Bowls Pictures

Fire Pit Building Document and Pictures

Fire Pit Covers Pictures

Fire and Water Tables Pictures

Fire Falls Pictures

Fire Tables Pictures

How To Build A Wine Barrel Fire Pit Pictures

How To Build A Propane Fire Pit Pictures

Fireplace Pictures, Fire Pit Pictures

Link To All Of Those Other Fireplace And Fire Pit Pictures

Increase your website traffic with Attracta.com
Click here to go to our "HOW MUCH DO I NEED PAGE"
.
Do you need a Fireplace Pipe Burner? "JUST CLICK HERE"
.
Our Crushed Lava can be purchased on line, "JUST CLICK HERE"
.
Our Fireplace Paint can be purchased on line "JUST CLICK HERE"
.
Play or Filler Sand can be purchased locally as this will save you shipping.
.
or call us at 909 989 6129 or e mail us at Ed@Moderustic.com

 

 

Has anyone ever told you "Nice Logs" ? Nooo, I don't think so.
"Utility Patent Applications now Published as of June 2005 and May 2006"

We are still in Patent Pending

We take pride in our new product and take Patent Infringement very seriously! There are several companies who have copied our product and or process and they will be in for a surprise when or even if our patent number becomes available to the public.

 

Please take note that in the United States reasonable royalties can begin to accrue when a
Patent Application publishes, (as Moderustic Inc has in June of 2005 and in May of 2006) depending on the state of the patent application at the time of issuance.
Please take note that we do intend to enforce our patent rights to the furthest extent
of the law upon issuance of our patent.

Patent
Application publication available on request. Don't be fooled by look-a-likes or overly expensive imitations, ask for Aquatic Glassel by Moderustic. Be sure to get a price quote and you'll see the difference.

We are now designing a national catalog which should be 130 to 150 pages! We are asking for your help in acquiring pictures of fireplaces and fire pits for our catalog that our glass was used in. We would also appreciate your comments and or feed back as well. Please send your e mails and pictures to:
Ed@Moderustic.com
Jaunzemis@msn.com
 

Copyright 2005 www.Moderustic.com All Rights Reserved.
Copyright 2005 www.AquaticGlassel.com All Rights Reserved.

Click here to view our website's sitemap!

Any questions please contact us at:
Phone: 909 989 6129


Fax: 909 944 3811
E Mail: Ed@Moderustic.com

Stop by and visit our Showroom in Rancho Cucamonga:
Moderustic Inc.
9467 Ninth Street #D
Rancho Cucamonga, California 91730

CSLB# C-17 693887

We are 2 miles north of the Ontario Airport
Hours: M-F 8:00 to 6:00 Every Saturday 10:00 to 2:00.
After hours appointments available on request.
If you're coming late, please call and we will wait. We usually stay until 6:00 pm.

We at Moderustic and Producers of Aquatic Glassel and the inventors of Aquatic Glassel Fireplace Glass, are proud to offer the consumer over 500 products and we know we have spawned a few undesirable competitors in the market place but we continue on our quest for betterment and greater success through you the customer. We have been criticized for offering the crushed lava rock and or filler method by all of these other companies. But we understand the wants and needs of the customer, you. Spend less and get more. Some of these companies are telling the consumer to not use filler, why? They only want to fill their pockets with your money and we want you to save money. We know we have devastated these companies with our filler saving methods but it is with the best intentions for the consumer in mind. We have refused to sell to these individuals and companies because of their business practices. So please understand their intentions when they want you to purchase more glass. We take pride in our new product and take Patent Infringement very seriously! There are several companies who have copied our product and or process and they will be in for a surprise when our patent number becomes available to the public and they will find their business in ruin. If you are a previous or new customer and would like to add your comments on these companies or your experience, we will post a testimonial page for these to be read by the public. If you would like to post just your comments, they are welcome as well. Again, we work for the consumer and not the competition.



Moderustic Return Policy


Moderustic Inc Return Policy and Legal Notices
•    Returns must be made within 30 days of purchase with exceptions only by management.
•    Returned products must be unused and/ or unmixed.
•    Returned products must be packaged well to avoid damage in transit, OR YOU WILL BE RESPONSIBLE FOR THE DAMAGE.
•    Returned products that are damaged in transit will not be able to be refunded.
•    Refunds will be made towards product cost only.
•    Refunds will not be given for non-product labor costs (consulting fees, installation fees, labor, shipping etc.)
•    Restock fees may apply depending on which items are being returned. (10% to 70%)
•    Refunds are processed after customer’s review and acceptance of refunded amount.
•    Refunds take approximately 1 week for processing less any customer delays.
•    Any return must have a return authorization in writing by the management and this will be noted.
•    There are no returns or refunds on any custom metal products what so ever!
•    We are not responsible for local codes and or if any of our products are or are not approved. Please check with your local building department or governing agencies for proper approvals before purchasing. Custom built or designed items are not returnable for any reason.
•    Any Designs, Drawings, PDF Files, Ideas, Pictures, Attachments, Renderings, Facsimiles, Faxes, Blue Prints, Copies, Documents and even copy written materials once sent to Moderustic Inc, Ed Jaunzemis, Aquatic Glassel or any employee of Moderustic Inc becomes property of said company to use, distribute, copy, reproduce, manipulate, recreate, modify, advertise, promote, lay claim to and or use in our discretion as we need.  If you do not agree with these terms then please do not send us anything. Our intentions are to create for you the "Customer" and it is our vast collection of material that will spawn an idea for you to have us create something for you. If we should create something/ anything for you that is one of a kind, you do not own any rights to this or there idea or ideas, product or concept in any way shape or form.
•    EXPEDITED SHIPPING NOTICE
(i.e. 2/ 3-Day Select, Next Day/ 2nd Air, etc.):
If UPS/ FedEx fails to deliver your packages within the expedited delivery time frame you have chosen, they can or will refund a PORTION of the delivery charges.  We will pass 100% of the UPS/ FedEx refund back to you.  The amount refunded is determined by UPS/ FedEx and will be less than the original expedited shipping charge that you originally paid. This is due to surcharges and fuel charges. We do not determine what will be credited back.
Click Here to see additional Terms and Conditions!

 

 

All of the pictures and content are copy written on this website:

U.S. Copyright Registration No is: VA 1-650-624

Entitled: "Moderustic 1107"  

Effective registration date is February 1, 2008.

Violators will be prosecuted.


                                                                                                               
Moderustic Inc
Ed Jaunzemis, President
9467 9th Street Suite D
Rancho Cucamonga, California 91730
Phone 909 989-6129 Fax 909 944-3811

 

 

 

Moderustic Aquatic Glassel Fireplace Glass Rocks Propane Fireplaces